Wake On Lan Anydesk Hot May 2026

It sounds like you want a feature where AnyDesk can trigger Wake-on-LAN (WoL) to power on a remote computer that is currently offline (sleeping or shut down).

Optional: create a small HTTPS endpoint on the Pi (nginx + simple auth) to send magic packet from browser or script. wake on lan anydesk hot

This article is your complete guide to making "Wake on Lan AnyDesk Hot" work—meaning your remote PC is always just seconds away from being hot, live, and accessible. It sounds like you want a feature where

The Procedure

  1. Ensure the target computer is in Sleep or Hibernate mode (some setups support shutdown, but sleep is more reliable).
  2. Ensure a second device on the same network is running AnyDesk.
  3. From your remote location, enter the AnyDesk ID of the target machine.
  4. AnyDesk will detect the machine is offline. If the relay device is active, you will see a "Wake" button or option.
  5. Click it. AnyDesk sends the signal to the relay, which wakes the target.
  6. Once the target boots, you can connect using your unattended access password.

Your PC is cold. Powered down. Asleep.

: Look for a "Power Management" or "Advanced" tab. Enable settings like Wake-On-LAN Resume on LAN Power on by PCI-E/PME Save and Exit to save these settings and reboot. AnyDesk Help Center 2. Windows Settings (Target PC) Go to Settings → Security → Unattended Access

Option A: WoL App + VPN to Home Network

  1. Set up a VPN server on your home router (OpenVPN/WireGuard).
  2. Connect your phone (via mobile hotspot or cellular data) to your home VPN.
  3. Now your phone is virtually on your home LAN.
  4. Use a simple WoL app (e.g., “Wake on LAN” on Android/iPhone) to send a magic packet to your PC’s local IP.
  5. Once the PC wakes, open AnyDesk normally — it will connect because the PC is now online.

Setting Up AnyDesk

  1. Install AnyDesk on the computer you wish to remotely access.
  2. Configure AnyDesk to allow remote access. You'll need to set up a password for unattended access.