Vag 908 Usb Driver 64 Bit May 2026

To install the VAG 908 USB driver on a 64-bit Windows system (including Windows 10 and 11), you generally need to use drivers that emulate a Virtual COM Port (VCP). Since version 908 is a legacy release, modern 64-bit operating systems may require manual installation via the Device Manager. Installation Guide for 64-bit Systems Download Official Drivers : It is highly recommended to obtain drivers from the Ross-Tech Virtual COM Port Drivers page , as these are designed for 64-bit compatibility. Run the Installer : Unzip the downloaded file and run the VAG-COM-USB-Driver-Installer.exe

Q: Can I use the vag 908 usb driver 64 bit on Windows 10?
A: Yes. The FTDI and CH340 64-bit drivers work perfectly on Windows 10 and Windows 11. vag 908 usb driver 64 bit

Step 4: Plug in the Cable & Assign COM Port

  1. Connect the VAG 908 USB cable to your PC (not to the car yet).
  2. Open Device Manager > Ports (COM & LPT).
  3. You should see "USB Serial Port (COMx)" or "VAG-COM Interface (COMx)".
  4. Right-click > Properties > Port Settings > Advanced. Change COM port number to COM1, COM2, COM3, or COM4 (VCDS works best with low COM numbers).

Ross-Tech Official: Download the Virtual COM Port (VCP) drivers from the Ross-Tech Virtual COM Port Drivers page. To install the VAG 908 USB driver on

Getting Your VAG 908 USB Interface Running on 64-Bit Windows Connect the VAG 908 USB cable to your

Back
Top