Locked out of your Traice DVR? Whether you're dealing with a forgotten admin password or just setting up a second-hand system, here is how to get back into your security recordings. 🔐 How to Reset Your Traice DVR Password

  1. Using a reset button: Some TRaice DVR devices have a small reset button on the back or bottom. Press and hold this button for a few seconds to reset the device to its default settings.
  2. Contacting support: Reach out to TRaice support or a authorized dealer for assistance with password reset.

Email Reset: If a recovery email was bound to the account, the DVR will display a QR Code.

  1. Power Down: Turn off the DVR using the rear power switch and unplug it.
  2. Open the Case: Warning: This may void your warranty. You will need to open the DVR casing (usually by removing screws on the side/back) to access the motherboard.
  3. Locate the Jumper/Button: Look for a small button labeled RESET or a set of pins with a jumper cap (similar to those found on a computer motherboard).
  4. Short the Pins:

    Removing the CMOS Battery: Locate the small round silver battery (CR2032) on the motherboard. Carefully remove it for 2–5 minutes and then reinsert it. This often resets the system clock to a default date (like 2000-01-01), allowing you to use a known default password or a super password for that specific date.

    While there is no specific official "Traice DVR" model documented in recent tech updates, DVR password recovery generally follows standardized firmware protocols

    It sounds like you're referring to a "Trace DVR" — likely a security DVR system from a brand like TRAICE (sometimes a rebranded OEM model).

Traice Dvr Password Reset Upd May 2026

Locked out of your Traice DVR? Whether you're dealing with a forgotten admin password or just setting up a second-hand system, here is how to get back into your security recordings. 🔐 How to Reset Your Traice DVR Password

  1. Using a reset button: Some TRaice DVR devices have a small reset button on the back or bottom. Press and hold this button for a few seconds to reset the device to its default settings.
  2. Contacting support: Reach out to TRaice support or a authorized dealer for assistance with password reset.

Email Reset: If a recovery email was bound to the account, the DVR will display a QR Code. traice dvr password reset upd

  1. Power Down: Turn off the DVR using the rear power switch and unplug it.
  2. Open the Case: Warning: This may void your warranty. You will need to open the DVR casing (usually by removing screws on the side/back) to access the motherboard.
  3. Locate the Jumper/Button: Look for a small button labeled RESET or a set of pins with a jumper cap (similar to those found on a computer motherboard).
  4. Short the Pins:

    Removing the CMOS Battery: Locate the small round silver battery (CR2032) on the motherboard. Carefully remove it for 2–5 minutes and then reinsert it. This often resets the system clock to a default date (like 2000-01-01), allowing you to use a known default password or a super password for that specific date. Locked out of your Traice DVR

    While there is no specific official "Traice DVR" model documented in recent tech updates, DVR password recovery generally follows standardized firmware protocols Using a reset button : Some TRaice DVR

    It sounds like you're referring to a "Trace DVR" — likely a security DVR system from a brand like TRAICE (sometimes a rebranded OEM model).

Review & Discussion

3/5 (5 votes)