Staples 17466 Laminator Manual -

The Staples 17466 Thermal and Cold Laminator is a versatile 9.5-inch machine designed for home, school, and small office use. This guide provides comprehensive operating instructions, technical specifications, and troubleshooting tips to help you get the most out of your device. Quick Setup and Operating Instructions

No Cutting Beforehand: Never laminate small scraps or cut-up pouch pieces. Laminate the full sheet first, then trim it once it has cooled. staples 17466 laminator manual

Q: Is the Staples 17466 the same as the GBC 90301? A: No. They are competitors. Do not use GBC parts on this unit. The Staples 17466 Thermal and Cold Laminator is

Step 1: Power On

Press the power button (usually located on the top right or front left). A green light will illuminate. The red “Ready” light will remain off initially. Warranty: Staples offers a limited 1-year warranty on

11. Technical Support & Warranty

• Warranty: Staples offers a limited 1-year warranty on this model for manufacturing defects. Does not cover jam damage, incorrect pouch use, or cosmetic wear.
• Support: Staples no longer directly supports this model. Check online user forums or replace with a newer laminator (e.g., Staples 17467 or 17469).
• Disposal: Do not dispose of in household trash. Recycle electronics per local regulations.

Step 4: Laminating

• Insert the open end of the pouch into the entrance slot.
• The machine’s rollers will automatically grab the pouch. Do not push or pull—let the machine do the work.
• The pouch will emerge from the rear slot.
• Allow the laminated document to cool flat for 60 seconds before handling.

If a document becomes misaligned or stuck, use the Jam Release Lever (typically located on the back or side). Press or pull the lever to disengage the rollers, then gently pull the document back out through the entry slot. Common Issues & Solutions

The Internet Archive Backup

If Staples has removed the original listing, try these third-party repositories:

1. Immediately slide the Power Switch to OFF and unplug.
2. Press and hold the Release Lever (located near entry slot on right or left side).
3. Gently pull the pouch out backward.
4. If stuck, wait 5 minutes for cooling, then pull.
5. Never use metal tools inside the slot.