Standard Construction Specifications Part 3 Abu Dhabi ((hot)) May 2026

The official "Standard Construction Specifications" for Abu Dhabi are primarily governed by the Department of Municipalities and Transport (DMT) Abu Dhabi Quality and Conformity Council (QCC)

Conclusion

3. Flooring (Section 3.3 – 3.7)

• Ceramic/Vitrified tiles: Water absorption ≤ 0.5% (for outdoor use in Abu Dhabi’s humidity). Slip resistance (R10 minimum for wet areas per Abu Dhabi QCC).
• Marble: Polished finish only for internal dry areas; honed or textured for external due to slip risk.
• Epoxy flooring: Required in kitchens, labs, and medical areas. Must achieve 3 mm thickness, with primer + self-leveling + top coat.

The implementation of Part 3 of the ADSCS has significant implications for the construction industry in Abu Dhabi: standard construction specifications part 3 abu dhabi

| Feature | International (e.g., ASTM) | Abu Dhabi SCS Part 3 Requirement | | :--- | :--- | :--- | | Grout color consistency | Visual inspection | Digital colorimeter read: ∆E ≤ 1.0 | | External tile slip resistance | Requires COF (Coefficient of Friction) ≥ 0.6 | Must use oil-wet ramp test (EN 13432) due to humidity, not dry COF. | | Waterproofing on roofs | Minimum 2 coats | 2 coats + polyester reinforcement scrim + 3rd coat over laps | | Paint for swimming pools | Chlorinated rubber | Epoxy polyamide (100% solids) – minimum 500 microns DFT | | Expansion joints in tile | Every 10–12m | Every 6m (thermal expansion coefficient is 30% higher than European norm) |

The benefits of standard construction specifications Part 3 in Abu Dhabi are numerous: Ceramic/Vitrified tiles: Water absorption ≤ 0

Procedures for excavation, backfilling, and trenching in accordance with Where to Access Full Versions Official E-Library: DMT E-Library

The importance of SCS Part 3 can be summarized as follows: The implementation of Part 3 of the ADSCS

Some key requirements in Part 3 of the SCS include: