Sscom V5.13.1 English -

SSCOM V5.13.1 is a lightweight Windows-based serial port debugging utility commonly used by hardware developers to test communication with microcontrollers like Arduino, STM32, and ESP8266. Changing Language to English

3. Setting Up the Serial Port

Step-by-step:

1. Select COM Port – From the dropdown list (e.g., COM3).
   If your device isn’t listed, check Device Manager → Ports (COM & LPT).
2. Set Baud Rate – Common values: 9600, 115200, 4800, etc. Match your device.
3. Data Bits – Usually 8.
4. Stop Bits – Usually 1.
5. Parity – Usually None.
6. Flow Control – Usually None (unless hardware handshake is needed).

High-Speed Baud Rates: Supports non-standard and high baud rates up to 115200 and beyond. Sscom V5.13.1 English

Advanced Usage Techniques

Automating Responses (Smart Reply)

1. Go to “Extend” → “Auto Reply”.
2. Click “Add”.
3. In “Receive Match”, enter the string or HEX pattern.
4. In “Auto Send”, enter the reply.
5. Enable the checkbox next to the rule.
6. Click “OK”. Now, every time that pattern arrives, Sscom will respond instantly.

1. Overview

Sscom V5.13.1 is a lightweight but powerful serial communication utility for Windows. It is widely used for: SSCOM V5

Connect Hardware: Plug your device into the PC using a serial cable or USB adapter. Launch Software: Run the executable directly. Select COM Port – From the dropdown list (e

2. High-Speed Data Handling

While traditional serial terminals struggle with data rates above 115200 bps, Sscom V5.13.1 can comfortably operate at 921600 bps and even higher (up to 2-3 Mbps depending on your hardware). It achieves this with a highly optimized receive buffer that prevents data loss, even during long logging sessions.