Sinotimer Tm-630s Manual //top\\ May 2026

Introduction

  • Release the CLOCK button. The current time is now set.
    1. Power the unit. The LCD will light up. If it shows garbage characters, press the R (Reset) button with a paperclip.
    2. Press and hold the CLOCK button for 3 seconds until the "Year" digits flash.
    3. Use the ▲ (Up) and ▼ (Down) buttons to set the correct year (e.g., 2026).
    4. Press CLOCK again. The month flashes. Adjust it.
    5. Press CLOCK again. The date flashes. Adjust it.
    6. Press CLOCK again. The hour flashes. Adjust it (pay attention to AM/PM if your unit displays 12-hour format; most use 24-hour format).
    7. Press CLOCK again. The minute flashes. Adjust it.
    8. Press CLOCK again. The second flashes. To set seconds to zero, press the RST button. Normally, you just let it run.
    9. Press CLOCK one final time to save and exit.

    Problem 4: I cannot delete a program

    • Cause: The TM-630S does not have a "delete" key. You must override the program.
    • Fix: Enter the program number (e.g., 5ON). Use ▲/▼ to set the time to --:-- (if supported) OR set the ON and OFF times to exactly the same value (e.g., ON 00:00, OFF 00:00), which effectively disables that program.

    Wiring Diagram Concept:

    The Sinotimer TM-630S is a versatile digital timer switch suitable for various applications. By following this guide and referring to the manual, you should be able to install, program, and troubleshoot your device with ease. sinotimer tm-630s manual

    [Appliance/Load] Live Wire -----------> Terminal 3 (L Out) Neutral Wire --------> Connected directly to Mains Neutral (Terminal 2)
    • Device not turning ON/OFF: Check the wiring and programming settings.
    • Display issues: Check the battery backup and power supply.

    Best For: Heavy-duty appliances (water heaters, air conditioners), street lighting, and precision-timed agricultural equipment. Introduction