Qidi Xplus Firmware Install -

To install firmware on a QIDI X-Plus series printer, you can generally choose between an online update via the printer's touchscreen or an offline update using a USB drive. Option 1: Online Update

Where to Find Firmware Files

Qidi Tech is active in the 3D printing community. You can find the most recent official files here: qidi xplus firmware install

4. Install Touchscreen Firmware

1. Copy TFT35.bin to root of USB drive.
2. Eject USB, then insert again.
3. On touchscreen → Settings → Machine → Update TFT.
4. Wait for green “Update success” → restart printer.

1. Prepare

• Select X-Plus (not Pro, not Max, not 2).
• Download the “Firmware & UI” bundle. Do not just grab the mainboard file—you need both parts.

White Screen/UI Error: If the UI fails to load, you may need a recovery file (like mksclient.recovery or mksscreen.recovery) placed on the USB root to force an automatic reset. To help you find the exact files you need: To install firmware on a QIDI X-Plus series

turn off the power until the printer restarts or prompts you to finish. Online Installation (WiFi Method) Available for with firmware V1.4.0 or later Ensure the printer is connected to WiFi. Navigate to the "Settings" "Check for updates" If a new version is available, select "Online Update" and follow the prompts. Post-Installation Calibration Copy TFT35

4. Flash via USB (if supported)

1. Install QIDI Slicer.
2. Connect printer via USB (install CH340 driver if needed).
3. Tools → Firmware Update → select file → start.
4. Do not interrupt power or USB during update.