Niton Xlt 898 User Manual [2021] May 2026

Here is the user manual content for the Niton XLt 898 Element Analyzer.

is a portable X-ray fluorescence (XRF) analyzer designed for rapid elemental analysis, specifically in alloy identification, scrap metal recycling, and mining applications. Key Technical Specifications Niton Xlt 898 User Manual

• Trigger Logic: How the deadman trigger works and how to ensure the detector window is flush against the sample.
• Measurement Time: Why longer measurement times equal higher accuracy, specifically for light elements.

5. Data Management

5.1 Storing & Recalling Readings

• Save: After measurement, press [F2] (Save). Use keypad to add sample ID (max 20 alphanumeric).
• Recall: Main menu → Data → Recall → scroll by date/time or ID.

11. Troubleshooting (Common Issues)

| Symptom | Likely Cause | Fix | |---------|--------------|-----| | No power | Dead battery | Recharge; check cradle contacts | | “Interlock error” | Window missing or safety shutter stuck | Replace window or contact service | | High counts / unstable | Cracked window | Replace Prolene film | | Low counts / long test time | Dirty window, thick paint, or wrong mode | Clean window; grind sample; switch to Alloy Plus | | Wrong alloy ID | Surface contamination or small sample | Clean sample; use workstand with masking | | Cannot connect to PC | Baud rate mismatch | Set 9600, N, 8, 1 on both XLt and PC | Here is the user manual content for the