Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Upd ~upd~
: Ensure the installation area has enough space for maintenance and manual release operations. The door must be in good mechanical condition, balanced, and open/close correctly. Rail & Motor Mounting
PAGE 1: IMPORTANT SAFETY PRECAUTIONS
READ BEFORE INSTALLING THE LIFE PROBO PR70 : Ensure the installation area has enough space
By following these guidelines, users can ensure the Life Probo PR70 operates effectively and safely, providing accurate and reliable patient monitoring. Always consult the device's manual for specific instructions and any updates. Fill a container with 500ml of white vinegar + 500ml water
- Fill a container with 500ml of white vinegar + 500ml water.
- Remove the filter cartridge. Place the intake hose into the vinegar solution.
- Run the PR70 in “Flush” mode for 3 minutes. Let sit for 30 minutes.
- Rinse by running fresh water (without filter) for 5 minutes.
- Reinstall the filter, reset timer, and flush again.
PAGE 3: TECHNICAL SPECIFICATIONS
2. TECHNICAL DATA
- Option A (Under-sink): Use the ⅜” quick-connect hose to attach to cold water valve.
- Option B (Countertop): Screw the diverter valve onto your faucet aerator. Connect included hose.
1.1 General Warnings
- Power Source: Connect only to a 110-240V ~ 50/60 Hz grounded outlet protected by a 15A RCD (Residual Current Device).
- Water/Liquid Exposure: (If PR70 is a water purifier) Do not submerge the main unit. If liquid spills on the control panel, disconnect power immediately.
- Ventilation: If the PR70 contains a compressor or fan (air purifier or refrigerator), maintain 10 cm (4 inches) clearance on all sides.
- Children & Pets: The PR70 is not a toy. Internal temperatures/UV lamps may cause injury.
- Modifications: Do not open the sealed motor/UV chamber. No user-serviceable parts inside except the pre-filter.
- [ ] Drinking water filtration (NSF/ANSI 42, 53, 401)
- [ ] Air purification (HEPA H13 + VOC removal)
- [x] Select your model variant. This manual covers the Probo PR70-H (Hydration) and PR70-A (Air) .
: Monthly testing of the obstacle detection system to ensure the door reverses upon meeting resistance. PAGE 3: TECHNICAL SPECIFICATIONS 2