Lenel Lnl3300m5 Installation Manual Upd Top [repack]

The Lenel LNL-3300-M5 Go to product viewer dialog for this item.

Save and Reboot: After applying static IP or DHCP settings, return all DIP switches to the OFF position (normal operating mode) and click Apply Settings and Reboot. DIP Switch Reference Table Operating Mode Normal operating mode Enable default User Name/Password Use factory default communication parameters lenel lnl3300m5 installation manual upd top

RS-485 (communicates with standard Lenel or Mercury hardware) Max Board Addresses Supports up to 32 board addresses Memory 15 MB on-board flash memory Backup Battery 3 V lithium (type BR2325, BR2330, or CR2330) The Lenel LNL-3300-M5 Go to product viewer dialog

Step 1: Set DIP switch 2 to ON (1, 3, and 4 OFF) and cycle power to reboot. Step 2: Access http://192.168.0.251 in a browser. Pinout usually includes: +V (Power), GND, Data 0/Data

Pinout usually includes: +V (Power), GND, Data 0/Data 1 (or OSDP A/B), LED Control, Beeper Control.

Note: The LNL-3300M5 supports both Legacy Wiegand and OSDP (Open Supervised Device Protocol) readers.

Plug the legacy 12 VDC power input, cabinet tamper, and AC power fail wires into the new board.