Work - Lava Benco V90 Ae9120 Flash File S160 Hang Logo New
"Lava Benco V90 AE9120 Flash File S160 Hang Logo New"
Resolve instances where the device is stuck permanently on the "Benco" or "Lava" startup screen. Repair System Corruption: lava benco v90 ae9120 flash file s160 hang logo new
. This process repairs software-related issues, including "dead boot" scenarios and recovery mode errors. Essential Preparation Battery Charge : Ensure the device has at least 50% battery to prevent it from turning off during the flash. Data Backup : Flashing will erase all user data . Back up anything important if the device allows access. : Install the latest Spreadtrum (SPD) USB Drivers on your PC so the computer recognizes the phone. Flash File Details Lava Benco V90 (AE9120) Build Version (New Version) : 100% Tested and verified to fix logo-hanging issues. Flashing Steps Download the Firmware : Obtain the tested Lava Benco V90 AE9120 S160 flash file from reliable sources like Flashfile Bazar or verified YouTube community links Extract the Files "Lava Benco V90 AE9120 Flash File S160 Hang
- Wrong firmware version (e.g., S150 instead of S160)
- Corrupted flash file (re-download from another source)
- Flashing tool settings – Did you use Format All + Download? That often removes critical NV data → hang on logo.
- Preloader/bootloader mismatch – Some MTK devices need only Download mode, not format.
✅ Step 4: Check preloader / bootchain
- If still hangs at logo, try flashing only preloader, lk, boot, recovery, system, vendor (skip userdata & cache) then wipe via recovery.
- If another working device exists, extract
lk.binandboot.imgfrom it.
Q2: Will flashing remove my IMEI number?
Using Download Only or Firmware Upgrade without formatting the nvram or protect partitions will preserve your IMEI. If you lose IMEI, use tools like Maui Meta or SN Writer to restore it. Wrong firmware version (e
7. Troubleshooting Common Flashing Errors
| Error | Meaning | Solution | | :--- | :--- | :--- | | S_BROM_CMD_STARTCMD_FAIL | Driver or preloader mismatch | Reinstall VCOM drivers. Use a different USB port (USB 2.0 recommended). | | S_DL_GET_DRAM_SETTINGS_FAIL | Wrong scatter or preloader | Ensure you’re using the exact S160 firmware. Try "Format All + Download" (last resort). | | S_FT_ENABLE_DRAM_FAIL | Dead battery or hardware fault | Charge phone for 2 hours using a wall charger. | | Status 0xC0010001 | Authentication error | Use an authenticated Download Agent (DA) file from the firmware folder. | | Phone still hangs on logo after flash | Wrong variant (e.g., Unisoc vs MTK) | Double-check chipset and download the correct S160 file. |
Processor Support: Specifically designed for the Spreadtrum (SPD) chipset used in the Benco V90.
3. Verified Steps to Fix (for Engineers/Technicians)
✅ Step 1: Confirm correct firmware
- Ensure firmware AE9120_V90_S160 matches exact PCB revision (check sticker on board under battery).
- Verify MD5 checksum of the firmware package.