Ivoclar Programat P90 Manual Fixed Exclusive

You can use this template to document the "fix" for your records or for the dental lab owner.

Rating: 4.5/5

The Ivoclar Programat P90 is a highly-regarded dental furnace designed for dental laboratories and clinics. As a manual model, it requires a thorough understanding of its features and operation to maximize its potential. In this review, we'll dive into the specifics of the Ivoclar Programat P90 manual and provide insights into its performance, usability, and overall value. ivoclar programat p90 manual fixed

Allow the furnace to cool down before starting the next program. B-value (Stand-by) out of range Ensure your stand-by temperature is set between Temperature too high Current temp is more than above the set T-value; check for a stuck relay. Control unit malfunction You can use this template to document the

• Standby Temp: Usually 700°C–850°C (depending on the material).
• Lift Time: The time it takes for the head to close.
• Press Temp: The specific temperature at which the ceramic liquifies (e.g., 915°C for e.max Press).
• Pressing Time: Usually automatic based on the size of the ring (e.g., 15–20 mins).

• Start Temp: 20°C
• Heating Rate: 55°C/min (standard for e.max)
• Final Temp: 840°C (for crystallization) or 1530°C (for zirconia)
• Hold Time: 7 to 10 minutes
• Vacuum: On (or Off for glaze/baking)

1. Daily cleaning: Clean the device daily to prevent the buildup of dust and debris.
2. Weekly calibration: Calibrate the device weekly to ensure accurate temperature control.
3. Annual maintenance: Perform annual maintenance, including replacement of worn-out components and thorough cleaning of the device.