Warning: flashing firmware may void warranty, brick the device, or erase data. Proceed only if you accept the risk. Back up any important files.
Method B — AV/OTG button method
SD Card: Use a high-quality SD card (at least 8GB recommended). SD Card Preparation i--- Mxq Pro 4k Firmware 7.1 2 Download Sd Card
Click "Make" and wait for the "Success" message. Your card should now contain three specific files: a bootloader partition, the firmware image, and a data file. Step 2: Flash the MXQ Pro 4K
Ensure "To Partition and Format" and "Erase Bootloader" are selected. Choose Image: Click "Open" and select your downloaded Click start and wait for the "Success" message. 🚀 Flashing the MXQ Pro 4K Follow these steps carefully to trigger the update: Power Off: Unplug the power cable from the MXQ box. Insert Card: Put the prepared SD card into the box’s slot. The Toothpick Method: Insert a toothpick into the (the reset button is hidden inside). Press and hold the button until you feel a click. Guide: Install "i--- Mxq Pro 4k Firmware 7
If you cannot use the Amlogic USB Burning Tool on a PC, follow these steps to flash from an SD card:
Check FreakTab for your PCB’s exact shorting points. Method B — AV/OTG button method SD Card
If SD card method fails: