Hurleypurley Foursome Ts07-54 — Min
Quick‑Start & Reference Guide
Hurleypurley Foursome – Model TS07‑54 (Min.)
The “TS07-54 Min” designation specifies the Torque Series 07, with a 54 mm minimal engagement length (axial stack height when fully compressed), optimized for space-constrained rotary actuators. hurleypurley foursome ts07-54 Min
5. Installation & Maintenance
5.1 Mounting
- Ensure shaft ends are clean and deburred.
- Slide the coupling onto the driving shaft until 27 mm ±0.5 mm insertion depth is reached (half of 54 mm).
- Tighten the four M5×0.8 clamping screws in a cross-sequence to 8.5 N·m using thread locker (Loctite 243).
- Insert driven shaft from opposite side, leaving 0.2–0.4 mm axial gap for thermal expansion.
Hurley / Purley: These often refer to separate entities in the golfing world. Liz Hurley Golf Classic Ensure shaft ends are clean and deburred
“A 54-minute audiovisual piece under the ‘HurleyPurley’ label, featuring a four-person segment or four-part structure, cataloged as TS07-54. The content may involve a discussion, game, collaborative creation, or performance. No public distribution or metadata is available; it likely exists within a private archive or as a work-in-progress reference.” Hurley / Purley : These often refer to
This segment likely denotes a timestamp or sequence code ("TS07") followed by the total duration of the media ("54 Min"). Context and Security Warning
Do NOT: Submerge any component in water, expose the board to direct sunlight for > 4 hours, or use harsh chemicals on the cards.
