Driver For Windows 10 Portable: Huawei E5573cs322

Huawei E5573Cs-322 is a compact 4G LTE mobile Wi-Fi hotspot capable of speeds up to 150Mbps. While it remains a budget-friendly option for on-the-go connectivity, its Windows 10 driver compatibility is mixed due to its age. Windows 10 Compatibility Review

• Driver Requirement: Requires the Huawei Mobile Broadband Drivers. These drivers allow Windows to recognize the specific Vendor ID (VID) and Product ID (PID) of the E5573Cs-322 and map them to the correct network miniport driver.

Procedure:

1. Extract the drivers to C:\Drivers\Huawei_E5573.
2. Connect the E5573CS322 to your Windows 10 PC via USB. Ensure the device is powered on.
3. Open Device Manager.
4. Locate the device – it may appear as "Huawei Mobile Broadband" with a yellow triangle, or "Unknown device".
5. Right-click → Update driver.
6. Select Browse my computer for driver software.
7. Click Let me pick from a list of available drivers on my computer.
8. Click Have Disk.
9. Click Browse and navigate to C:\Drivers\Huawei_E5573.
10. Select the .inf file (usually haui.inf or ndis.inf) → Open → OK.
11. From the list, select Huawei Mobile Connect - Network Adapter or Huawei NDIS.
12. Click Next.
13. If a "Windows Security" warning pops up about an unsigned driver, select Install this driver software anyway.
14. Wait for the installation to complete. You should see a success message.

To switch to Tethering Mode, you must enable "HiLink" or "USB Tethering" inside the device’s web interface (192.168.8.1). If this is not enabled, Windows 10 will never detect the driver. huawei e5573cs322 driver for windows 10