Hp Fxn1 E93839 Motherboard Specs Updated [updated]

The HP FXN1 E93839 is a reliable, enterprise-grade motherboard originally pulled from the widely deployed HP Compaq 8200 Elite series desktops. Despite its age, its high manufacturing standards make it a staple in the second-hand market for budget setups, secondary home servers, or arcade emulation rigs.

For Mateo, the experience felt like participating in an understated rebellion against planned obsolescence. It was proof that careful design changes could push a device’s life forward without fanfare. He began cataloging small salvageable components, offering to build affordable rigs for neighbors who needed dependable machines for schoolwork, remote work, and paperwork that technology had made less poetic but more necessary. hp fxn1 e93839 motherboard specs updated

✅ Upgradability:

• CPU upgrade possible up to i7-7700T (35W) or i7-7700 (65W) – check cooling.
• NVMe SSD works if BIOS is updated to version ≥ 2.10.
• Memory can be upgraded to 32 GB (DDR4 SODIMM).

Technical Report: HP FXN1 (E93839) Motherboard

Report Date: 2026-04-12
Product Type: Proprietary Micro-ATX Motherboard
Primary Use: HP All-in-One (AiO) Desktop PCs (e.g., HP 200 series, HP ProOne 400 G2, HP EliteOne 800 G2)
Manufacturer: Hewlett-Packard (Manufacturer Part Number: E93839) The HP FXN1 E93839 is a reliable, enterprise-grade

1. Core Specifications at a Glance

| Feature | Specification | | :--- | :--- | | Manufacturer | Pegatron (OEM for HP) | | Model Numbers | FXM1 / IPM17-DD / E93839 | | Form Factor | Micro-ATX (24.4 cm x 24.4 cm) | | Socket | AMD FM2 (Not FM2+) | | Chipset | AMD A68M (Bolton-D2H) | | Release Era | 2012 – 2014 | CPU upgrade possible up to i7-7700T (35W) or

7. Common Problems & Solutions

| Problem | Solution | | :--- | :--- | | Fans run 100% after PSU swap | You used a standard PSU. Install a HP proprietary PWM adapter or short the sense pin (pin 20 to ground). | | No POST with 8GB modules | Only double-sided (2Rx8) DDR3 DIMMs are supported. Avoid 8GB single-sided (1Rx8) modules. | | USB 3.0 ports fail after sleep | Install Intel USB 3.0 driver version 5.0.4.43 or newer. | | GPU not recognized | Disable Secure Boot and enable “Legacy Boot” in BIOS. Some GPUs require UEFI GOP – this board uses legacy VBIOS only. |

• 2x SATA III (6Gb/s) – Use these for your SSD.
• 2x SATA II (3Gb/s) – Use these for optical drives or HDDs.

BIOS Updates: Always check for the latest BIOS version from the HP Support site before upgrading to an i7 processor to ensure compatibility.