!link! - Hp 8653 Motherboard

The HP 8653 motherboard, also known by its HP codename Rother, is a proprietary motherboard used primarily in HP Pavilion and HP Envy desktop computers. Built around the Intel H370 chipset, it serves as a solid foundation for 8th and 9th generation Intel Core processors.

• Intel Pentium 4: Northwood and Prescott cores (up to 3.4 GHz).
• Intel Celeron D: 300 to 300 series (up to 3.06 GHz).
• Intel Pentium 4 Extreme Edition: (Rare, but supported on the 865PE version).

Alternatives & Comparison: 8653 vs. 875P vs. 915G

| Feature | HP 8653 (865G) | Intel 875P (Canterwood) | Intel 915G | | :--- | :--- | :--- | :--- | | Socket | LGA 775 | Socket 478 / LGA 775 | LGA 775 | | Memory | DDR (Only) | Dual-channel DDR | DDR2 | | Graphics Slot | AGP 8x | AGP 8x | PCI-Express x16 | | SATA Speed | 1.5 Gb/s | 1.5 Gb/s | 3.0 Gb/s | | Retro Gaming | Excellent (Win98/XP) | Excellent (Overclockable) | Poor (Win98 drivers) | hp 8653 motherboard

: Standard SATA ports for 3.5-inch or 2.5-inch hard drives and SSDs. Integrated Components GTX 1080 No Display in HP Envy TE01-0034 - HP Community The HP 8653 motherboard , also known by

Audio & Networking: Features integrated Realtek ALC3601 5.1 channel audio and a Realtek RTL8111HSH Gigabit LAN controller. The Upgrade Path: How Far Can You Go? Intel Pentium 4: Northwood and Prescott cores (up to 3

(2 x 16GB) of DDR4-2666 MHz Non-ECC RAM. Some users report success with 64GB configurations using specialized Crucial memory modules PCIe Slots: 1 x PCI Express x16 (typically used for dedicated GPUs). 1 x PCI Express x1. M.2 Storage: 1 x M.2 Socket 3, Key M (supports NVMe PCIe x4 SSDs). M.2 Networking: 1 x M.2 Socket 1, Key A (occupied by WLAN/Bluetooth card). Connectivity & Rear I/O

LGA 1200, supporting 10th Gen Intel processors (Comet Lake) with up to 65W TDP. Memory Support: Two DDR4 DIMM (288-pin) slots. Supports up to 32 GB (2 x 16 GB).

• Proprietary Power Connector: Major headache. Many of these use a non-standard 24-pin (or 20+4) power pinout. Plugging a standard ATX PSU in will destroy the board. You must use the original HP power supply or buy a costly adapter.
• No Overclocking: The BIOS is completely locked down. You can’t adjust voltages, timings, or FSB.
• Legacy Everything: Only IDE hard drives (no SATA on some revisions), AGP 8x (not PCIe), and rear PS/2 ports. Don’t expect USB boot or modern SSD boot without a controller card.
• CPU Support: Limited to Northwood/Prescott P4s (Socket 478). Runs hot and slow by modern standards.

. It is designed to support 10th-generation Intel Core processors and adheres to HP's proprietary standards for power and connectivity. HP Support Community Core Specifications Form Factor: