How To Reset Epson L3252 Printer _verified_ Link

Resetting the Epson L3252 involves either a factory settings reset using the "i" and Wi-Fi buttons, or a network-only reset via the network status button. To resolve service required, or ink pad errors, software tools like the Epson Adjustment Program can be used to reset the Waste Ink Pad Counter to 0%. Learn more through YouTube video guide.

• If these numbers are above 100% or show "Limit Over," you need a reset.

4. Hard Reset (Power Cycle – for Frozen/Unresponsive Printer)

If the printer is stuck or not responding to buttons: how to reset epson l3252 printer

The Reality: Epson programed this limit to ensure you bring the printer to a service center. If you reset it without changing the pads, you are essentially gambling that the physical pads still have absorbency left. Resetting the Epson L3252 involves either a factory

2) Power + network reset (quick method)

1. With the printer on, press and hold the power button for 10–15 seconds until the printer powers off.
2. Wait 30 seconds, then power on again.
3. If reconnecting Wi‑Fi: use the printer’s control panel or Epson Smart Panel/Net config to re-enter network credentials. Result: Often helps with network or firmware-related hangs.

4) Network/Wi‑Fi reset (reconfigure wireless)

1. Turn on the printer.
2. Press and hold the Wi‑Fi button (or Wi‑Fi + other combination per manual) until the Wi‑Fi indicator flashes — consult the L3252 manual for exact button if needed.
3. On your router or device, start WPS push-button or use printer software to select SSID and enter password.
4. Use Epson Smart Panel or the printer’s web interface to finish configuration. Result: Clears previous Wi‑Fi settings and lets you connect to a new network.

Step 2: Run the Adjustment Program

1. Download the Tool: Search specifically for "Epson L3252 Adjustment Program" or "Epson L3252 Resetter". Note: These are often hosted on third-party technician forums. Be cautious of malware and always scan downloads.
2. Run as Administrator: Right-click the .exe file and select "Run as administrator."
3. Select Model: In the "Model Name" dropdown, select L3252. Ensure the "Port" is set to Auto Selection (or select the USB port your printer is connected to).
4. Particular Adjustment Mode: Click the button labeled Particular adjustment mode.
5. Find the Reset Option: Under the "Maintenance" section, find and double-click Ink Pad Counter.
6. Check the Box: You will see a box next to "Main Pad Counter." Check this box.
7. Initialize: Click the Check button to see the current percentage. Then click Initialization.
8. Wait: The tool will reset the counter. Wait until it says "Finished."
9. Finalize: Turn the printer off using the power button, wait 10 seconds, and turn it back on.