How To Install Mtk Driver Mediatek Preloader Usb Vcom: |best|

This driver is essential for flashing custom ROMs, unlocking bootloaders, or recovering bricked MediaTek devices. The critical challenge is that the Preloader mode is only active for 3–5 seconds when you connect the device.

1. Turn off your MTK device completely.
2. Open Device Manager on your PC.
3. Connect the phone to the PC while holding the Volume Down button (this forces the phone into Preloader/BROM mode).
4. Watch the Device Manager list. You should see a device appear briefly listed as MediaTek PreLoader USB VCOM Port under the "Ports (COM & LPT)" section.

   Step 4: Manually Install the Driver

   1. Right-click the unknown device → Update driver.
   2. Select "Browse my computer for drivers."
   3. Click "Let me pick from a list of available drivers on my computer."
   4. Scroll down and select "Show All Devices" → Next.
   5. Click "Have Disk" → Browse.
   6. Navigate to your extracted MTK_USB_VCOM_Driver folder.
   7. Select the file named android_winusb.inf or mtk_usb.inf (depending on version). Click Open → OK.
   8. From the list, select "MediaTek USB VCOM (PreLoader) Port" or similar. Click Next.
   9. If Windows warns about unsigned driver, click "Install this driver software anyway."

   Windows 10 and 11 require digitally signed drivers by default. You must temporarily disable this to install MTK drivers . How to install Mediatek USB VCOM drivers in Windows how to install mtk driver mediatek preloader usb vcom

   The progress bar filled green. "The hardware is now successfully installed." This driver is essential for flashing custom ROMs,