Exclusive: Hilti Te 55 Manual

The TE 55 features a dual-mode system that allows for rapid switching between different tasks: Rotary Hammer Drilling: Set the indicator to the symbol for concrete and masonry.

Assembly and Accessories

  1. Bit installation: Insert the bit into the chuck and secure it by turning the bit holder clockwise.
  2. Chuck maintenance: Regularly clean and lubricate the chuck to ensure smooth operation.

Note on "Manual Exclusive": If you were specifically looking for a document titled "Manual Exclusive," this is not a standard Hilti document name. You are likely looking for the Operating Instructions. You can find the official PDF manual for the TE 55 on the Hilti website by navigating to: hilti te 55 manual exclusive

Operating Instructions

  1. Check that the bit is appropriate for material (masonry bit for concrete, chisel for demolition).
  2. Select mode with selector dial.
  3. Hold tool firmly with both hands; use auxiliary handle for control.
  4. Start at low speed to position bit, then increase speed as needed.
  5. Apply steady pressure; let the tool’s impact energy do the work—do not force.
  6. For chiselling, use controlled hammer-only mode and reposition chisel angle as needed.
  7. Use intermittent operation for long continuous drilling to avoid overheating.

: Check carbon brushes and tool holder seals regularly to ensure optimal power transfer and dust protection. The TE 55 features a dual-mode system that

Annual (Hilti Fleet Service)

Drilling and Chiseling Techniques

  1. Drilling: Hold the tool at a 90-degree angle to the work surface and apply gentle to moderate pressure.
  2. Chiseling: Hold the tool at a 30- to 40-degree angle to the work surface and apply moderate pressure.

3. True Combihammer Versatility

The TE 55 is designed as a "2-mode" machine, making it versatile enough to replace two tools: Bit installation : Insert the bit into the