Skip to main content

Download Driver Cutting Plotter Jinka 1351 Link !!top!!

Report: Driver Download for Jinka 1351 Cutting Plotter

Introduction

The Jinka 1351 is a cutting plotter used for various applications, including cutting vinyl, paper, and other materials. To ensure the plotter functions correctly with a computer, a driver (or software) is necessary. This report aims to guide on how to find and download the appropriate driver for the Jinka 1351 cutting plotter.

Troubleshooting Common Driver Issues

| Problem | Solution | |---------|----------| | “Driver not found” after download | Disable antivirus temporarily – some mark plotter drivers as false positives. | | Plotter cuts mirror image | In driver preferences, disable “Mirror” or “Reverse X”. | | USB not recognized | Install the CH340/CH341 USB-to-serial driver (common for Jinka 1351). Download official CH340 driver from WCH.cn. | | Cuts are undersized | Check if your software is set to “HP-GL” mode and not “DMPL”. | download driver cutting plotter jinka 1351 link

In your software (e.g., Artcut or FlexiSign), select the correct COM Port (check Windows Device Manager under "Ports"). Report: Driver Download for Jinka 1351 Cutting Plotter

USB/COM Port Driver: For connection issues, the common USB-to-serial driver used is the CH341SER, which can often be found on the SignCut support site. 🛠️ Installation Steps Check Device Manager : Open the Device Manager

  1. Check Device Manager: Open the Device Manager on your computer (Windows: Press the Windows key + X and select Device Manager; macOS: Go to System Preferences > Devices).
  2. Look for the Plotter: Verify that the Jinka 1351 cutting plotter is listed and recognized by the operating system.

C. Via Cutting Software (ArtCut or Flexi)

Often, the driver is not a standalone file but included within the cutting software installation disc (ArtCut 2009 or 2018 versions commonly shipped with this machine).

Troubleshooting Tips