Добавить в корзину
The Bradex BX60 is a traditional 4-Amp analog battery charger designed for 12V lead-acid car batteries. It features a simple design with a front-facing ammeter to monitor the charging current and built-in protections against short circuits and reverse polarity. Quick Specifications Charging Voltage: 12V DC. Charging Rate: 4 Amps RMS.
Note: The brand "Bradex" is often associated with diagnostic tools and automotive accessories manufactured for the European market (frequently linked to companies like ESL or other OEM manufacturers). While specific official documentation can be scarce, the BX60 model follows the standard architecture of portable, linear or switch-mode 6/12V battery chargers.
Having access to a complete, accurate Bradex BX60 battery charger manual is the difference between a safely charged battery and a damaged one—or worse, a garage fire. By following the connection order, selecting the right mode, respecting error codes, and performing basic maintenance, you will maximize both the life of your batteries and the charger itself. bradex bx60 battery charger manual
Note: Always refer to the physical safety manual included with your unit for specific legal and warranty information. This guide is for educational purposes based on standard BX60 specifications.
Check the battery’s electrolyte levels (if applicable) and clean the battery terminals using a wire brush to ensure a solid connection. 2. Connection Sequence The Bradex BX60 is a traditional 4-Amp analog
Insulation: It is double-insulated, meaning it doesn't require a separate earth connection. Step-by-Step Setup Guide 1. Preparation & Safety
: Ensure the area is well-ventilated to avoid the buildup of explosive gases. Battery Check Charging Rate: 4 Amps RMS
Preparation: Ensure the area is well-ventilated to avoid flammable gas buildup. If possible, disconnect the battery from the vehicle to protect the alternator.
Important Note: The Bradex BX60 is not suitable for 6V batteries, lithium (LiFePO4) batteries unless specifically labeled, or non-rechargeable batteries. Attempting to charge incompatible battery types can cause fire or explosion.
