To program your Baofeng GT-3TP Mark III , you have two main options: the free community-standard software (highly recommended) or the Official Manufacture Software 1. CHIRP (Recommended)

Plug the USB end into your PC and the 2-pin end firmly into the radio's side port.

Select Baofeng as the Vendor and GT-3TP (or UV-5R) as the Model.

Step 5: Writing Back to the Radio

Once your channels are set:

is highly recommended to avoid driver issues common with cheaper clones.

2. Where to Download Safely

✅ CHIRP (Best option)

• Official site: chirp.danplanet.com
• Download the "daily build" (not the old stable – the stable is too old for newer GT-3TP firmware)
• Steps after install:

  COM Port Configuration: Once the cable is connected, you must identify the correct COM port in your computer's Device Manager. If the software cannot open the port, try a different USB slot or ensure the cable is fully seated in the radio.

  Battery Power: Ensure your radio is fully charged before connecting to prevent it from powering down during a data transfer. Step-by-Step Connection Guide